  |
This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
Aluminum cantilever
Specially wound coils increase output voltage
Durable low-resonance polymer housing
Compatible with any AT-VMN95 replacement stylus
Frequency Response 20-22,000 Hz
Channel Separation 20 (dB at 1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Stylus Construction Bonded round shank
Recommended Load Impedance 47,000 ohms
Coil Impedance 3.3 k ohms (1 kHz)
DC Resistance 485 ohms
Coil Inductance 550 mH (1 kHz)
Load Capacitance 100 to 200 pF
Output 4.0 mV (1 kHz, 5 cm/sec.)
Channel Balance 2.0 dB (1 kHz)
Stylus Shape 0.3 x 0.7 mil elliptical
Cantilever Aluminum pipe
Mount Half-inch
Weight 6.1 g (0.22 oz)
Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
Replacement Stylus AT-VMN95E
Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers
Cartridges
Record Player Systems
Cartridges
Cartridges
Audio Technica cartridge VM95E
|
 |
The AT81CP allows owners of Technics™, Hitachi™, Pioneer™* and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer. Also suitable replacement for discontinued cartridges: AT3472P, AT3482P, EPC310MC, EPC-P24, SL10 and SL15.
Designed specifically for the linear format, the AT81CP features Audio-Technica’s unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.
Specifications:
Type: Dual Magnet
Mounting: P-Mount
Frequency Response: 20 - 20,000Hz
Channel Separation: 18dB at 1kHz
Output Channe Balance: 2.5dB
Output Voltage: 3.5mV (mV at 1kHz, 5cm/sec)
Vertical Tracking Angle: 20o
Vertical Tracking Force Range: 1.0 -1.5g
Stylus Shape: Conical
Stylus Size: 0.6mil
Stylus Construction: Bonded Round Shank
Cantilever: Carbon Fibre Reinforced ABS
Coil Inductance: 400mH (1kHz)
Recommended Load Impedance: 47KΩ
Recomended Load Capitance: 100 - 200pF
Weight: 6.0g
Dimensions: H10.0 x W15.3 x D35.1mm
Replacement Stylus: ATN81CP
Catalogue Ref: AU-AT81CP
Cartridges
Record Player Systems
Audio-Technica: AT81CP P-Mount
Cartridges
Cartridges
|
 |
Audio Technica Replacement MM-cartridge AT-3600L
Universal Moving Magnet Cartridge + Stylus Diamond Tip for vinyl record players.
Please note this model does not come with mounting screws.
Replacement cartridge with stylus
High-quality diamond tip
Easy to install
Robust housing for reliable, long lasting performance
Fixing: Standard, two screws
Tracking Pressure: 1,5 - 3 gram
Output: 5.3mV
Frequency range: 20-20.000Hz
Specifications
Dimensions (L x W x H) 20 x 15 x 15mm
Cartridges
Record Player Systems
ATN91
Cartridges
Cartridges
|
 |
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.
Specifications:
Model: AT-VM95EN
Type: Dual Magnet
Mounting: ½" centres
Frequency Response: 20 - 23,000Hz
Channel Separation: 22dB (at 1kHz)
Output Channel Balance: 2.0dB
Output Voltage: 3.5mV (mV at 1kHz, 5cm/sec)
Vertical Tracking Angle: 23o
Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0g)
Stylus Shape: Elliptical
Stylus Size: 0.3mil x 0.7 mil
Stylus Construction: Nude Round Shank
Cantilever: Aluminium Pipe
Coil Impedance: 3.3 KΩ (1 kHz)
Coil Inductance: 550mH (1kHz)
DC Resistance: 485Ω
Static Compliance: 20 x 10-6cm/dyne
Dynamic Compliance: 7 x 10-6cm/dyne (100Hz)
Wire used for Coil: T.P. Copper
Recommended Load Impedance: 47 KΩ
Recomended Load Capitance: 100 - 200pF
Weight: 6.1g
Dimensions: H17.2 x W18.9 x D28.3mm
Replacement Stylus: AT-VMN95EN
Cartridges
Record Player Systems
Audio Technica VM95EN
Cartridges
Cartridges
|
|
 |
This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
VM95 Series dual magnet cartridge with 0.6 mil conical stylus
Aluminum cantilever
Specially wound coils increase output voltage
Durable low-resonance polymer housing
Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
Compatible with any AT-VMN95 replacement stylus
Frequency Response 20-20,000 Hz
Channel Separation 18 (dB at 1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Stylus Construction Bonded round shank
Recommended Load Impedance 47,000 ohms
Coil Impedance 3.3 k ohms (1 kHz)
DC Resistance 485 ohms
Coil Inductance 550 mH (1 kHz)
Load Capacitance 100 to 200 pF
Output 4.0 mV (1 kHz, 5 cm/sec.)
Channel Balance 2.5 dB (1 kHz)
Stylus Shape 0.6 mil conical
Cantilever Aluminum pipe
Mount Half-inch
Weight 6.1 g (0.22 oz)
Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
Replacement Stylus AT-VMN95C
Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers
Cartridges
Record Player Systems
Audio Technica system VM95C Moving Magnet
Cartridges
Cartridges
|
 |
Specification:
Mono Ceramic Cartridge supplied complete with a Mono/78rpm stylus
Output: 210mV
Playing weight: 3.0 - 5.0g
Frequency Response: 50Hz-12kHz
N 116 Mono and 78rpm
Cartridges
Record Player Systems
ERC: 5MB MONO CERAMIC CARTRIDGE
Cartridges
Cartridges
|
 |
Suitable replacement cartridge supplied with one Stereo and one Mono stylus and mounting bracket. Ideal replacement for most Dansette type stereo record players. Front turnover knob markings: S=Stereo 0.5mil, M=Mono 1.0mil.
Stereo Ceramic Cartridge
Output: 250mV
Frequency Response: 30-12,000 c/s
Stylus Pressure: 3 - 6 grams
Stylus Replacements:
N 039 - 0.7mil Stereo/Mono
N 038-78 - 2.5mil 78rpm
Cartridges
Record Player Systems
Ronette 105
Cartridges
Cartridges
|
|
Styli
New Zealand Customers
International Customers